Changing Default Settings - Sharp MD-MT90W Manual De Manejo

Changing Default Settings

Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MODE/
CHRG button for 2 seconds or more. "SET UP"
will appear.
When you release the button, "BEEP ON" or "BEEP
OFF" will appear.
2
Press the or button to display the menu.
3
Press the MODE/CHRG button to switch items.
4
Press the /:OFF button.
„ Beep sound
You can eliminate the confirmation sound that beeps
when you press a button.
„ Auto play
You can make the unit not play automatically when you
insert a playback-only MiniDisc or an accidental erasure
protected MiniDisc.
„ Auto power save
When the unit is used in a place exposed to much vibra-
tion, sound skipping can be decreased by cancelling the
auto power save function. (Battery will drain faster.)
What is auto power save function?
Auto power save function automatically adjusts the sound
skip memory storage to be from 5 to 10 seconds depend-
ing on playback conditions, this saves battery power. If
the MiniDisc unit is used in areas of much vibration, it
may be necessary to fix the sound skip memory to 10
seconds "Psave OFF". This will improve performance
under difficult conditions but uses more power. (When
the AC/car adaptor is used the 10 second mode is always
used.)
„ Digital recording level
"D.L MODE 1"
The digital recording level you set will be kept even after
cancelling recording.
"D.L MODE 2"
Every time you cancel recording, the level will return to
[D.L 0dB].
ENGLISH
00/12/27 E_90EX_5.FM
E-30