Sharp MD-MT90W Manual De Manejo página 43

NO z Poor connection of the digital cable.
SIGNAL z No output signal comes out from the connected
unit to playback.
z The input signal has improper sampling frequency.
NOT z You tried to play back a track that cannot be
PLAY played with this equipment.
PLAY MD z You recorded on a playback-only disc.
POWER ? z Improper power is being supplied.
PRO- z The write protection tab of a MiniDisc is set to the
TECTED protected position.
z You tried to record on a playback-only disc.
SORRY z Since a track number is currently being located or
updated, the unit cannot accept your command.
TEMP z The temperature is too high.
OVER
TOC z There is an error in the recording signal.
FORM (**)
TOC FULL z There is no space left for recording character in-
formation (track names, disc names, etc.).
Tr. z The track has been protected from being erased. z Edit the track with the device on which it was recorded.
Protect
? DISC z A disc which contains data other than music was
played.
z There is an error in the signal recorded on the disc.
Number or symbol appears in (*) position.
z Connect the digital cable securely.
z If the portable CD player has a function to prevent
sound skips, deactivate it.
z Playback with the connected unit.
z Play back another track.
z Replace it with a recordable disc.
z Use one of the specified power sources.
z Move the write protection tab back to its original posi-
tion.
z Replace it with a recordable MiniDisc.
z Wait for a while and try the operation again.
z Turn off the power, and wait for a while.
z Erase all of the tracks, and then record again.
z Replace it with another recordable disc.
z A disc which contains non-music data cannot be
played.
z Replace it with another recorded disc.
ENGLISH
00/12/27 E_90EX_6.FM
E-42