ProMed 520 Manual Del Usuario página 20

i
nforMation on tHe unit
DE
Before operating the unit for the first time, please check that all
contents have been delivered and that the line voltage is correct.
US
This is done by checking whether the line voltage required for
the unit (you can find this information on the specification plate)
FR
corresponds to the local power supply (operating voltage of 230 V ~
connected to a correctly installed wall socket with a supply voltage
IT
of 230 V ~; operating voltage of 115 V ~ connected to a correctly
installed wall socket with a supply voltage of 115 V~.
ES
• The Promed 520 unit, in combination with the grinding heads
NL
designed for this unit, is ideal for manicures and gentle pedicures,
and is also particularly suitable for use with nail techniques (nail
RU
design).
• The Promed 520 unit uses a high performance motor. The
PL
electronic speed control is used to smoothly set the speed of the
grinding head. The unit can rotate clockwise or anticlockwise
SE
(reversible).
FI
/
accessories
• The grinding head holder is able to fixate all commercial grinding
• Grinding head bits are available at your local specialist retailer
• To ensure hygienic operation, the grinding heads must be
• The handpiece may only be disinfected using disinfectant wipes.
heads with standardized dental size shafts of 2.332 to 2.350 mm
(0.091 - 0.093 inches). Please use only high-quality grinding
heads with a rounded shaft end and a maximal shaft length of
36 mm (1.26 inches) to guarantee the longest life possible for
the grinding head holder! Always make sure that the grinding
head does not come in contact with other objects when you
lay the handpiece down. There is a risk of the shaft becoming
compressed and asymmetrical. Asymmetry in the grinding head
causes damage to the handpiece!
or Promed. (www.promed.de).
disinfected after use.