Conceptronic CSATACOMBO Guía De Instalación Rápida página 11

ENGLISH
4. Windows Driver Installation
Before you can use the CSATACOMBO Controller Card, you need to install the drivers.
These drivers can be found on the CD-ROM included in your CSATACOMBO package.
1. When Window starts, a "New Hardware Wizard" will appear. Click "Cancel" to
abort the "New Hardware Wizard".
2. Insert the CD-ROM in your CD-ROM Drive. The Autorun should appear automatically.
If the Autorun menu does not appear, navigate to "My Computer" and double-click
on the CD-ROM drive to start the Autorun menu.
3. Select the correct driver for your installed Windows version.
Note: Make sure you select the correct Driver for your Windows Version. If you use
Windows 2000/XP, select the option "Windows 2000/XP". If you use Windows
Vista, select the option "Windows Vista".
4. The VIA Setup Wizard will appear. Click "Next" to continue.
5. Accept the License Agreement by selecting "I Agree" and click "Next" to continue.
6. Select the components to install. By default, the VIA Driver and the VIA V-Raid
Utility will be installed. Click "Next" to continue.
11