Hardware Installation - Conceptronic CSATACOMBO Guía De Instalación Rápida

ENGLISH

2. Hardware installation

1. Turn off your computer and disconnect the power cable from the back of the
computer.
2. Open the cover of your computer by removing the screws on the back of the
computer.
3. Find a free PCI slot in your computer and remove the corresponding back plate.
4. Insert the CSATACOMBO
Controller Card gently in
the free PCI slot.
5. Fasten the CSATACOMBO
Controller Card in the
back plate of the
computer with a screw
and screwdriver.
8