ENGLISH
6
HD7460
Important
Do not use the appliance if the plug, the cord or the appliance
itself is damaged.
Before you connect the appliance, check whether the mains
voltage indicated on the appliance corresponds with the mains
voltage in your home.
Preparing the appliance for use
1
Clean the jug and filterholder (see section 'Cleaning').
2
Place the appliance on a stable surface.
Do not put the appliance on a hot surface
Keep the appliance out of the reach of children and make sure that
they are unable to pull at the cord.
3
Put the plug in an earthed wall socket.
C
You can store excess cord at the back of the appliance.
Prevent the cord from coming into contact with hot surfaces.
C
4
Open the lid.
C
5
Fill the watertank to the MAX-indication with cold, fresh water
and put the jug in place.
Do not put a filter and coffee in the basket.
C
6
Switch the appliance on by pressing the button.
The pilot light goes on.
B
Let the appliance run until the watertank is completely empty.
7
After all water is in the jug: switch off the appliance.
Let the appliance cool down for at least 3 minutes before you start
brewing coffee.