Easypix GoXtreme Blackhawk+ Manual Del Usuario página 6

1.Inserting micro SD Card
Note: Please choose a branded U3 micro SD card and format the memory card using the camera before
the first use.
2.Installing and removing the battery
A. The battery compartment can be secured against accidental opening. You will find a lock button on
the battery compartment. To open the battery compartment unlock it and slide it in the direction
shown on the cover.
B. Install the battery into the camera as indicated by the +/- symbols and in the direction of the
arrows marked on battery.
C. Battery status is indicated as follows: Full power mode"
D. Removing the battery: Open the battery cover and take the battery out.
Note: Please engage the lock on the battery compartment cover before each use.
3.Charging the battery
A. The battery can be charged by connecting it to a computer or a power adapter.
B. The camera can record videos while charging (switch into vehicle-mounted mode in the Menu).
C. The camera can also be charged while the camera is turned off.
4.Turning the camera on and off
Press and hold the power button for 3-5 seconds to turn it on/off.
5.Mode Switching
Short pressing the power button repeatedly changes the cameras operating mode in the following
sequence: video recording / photo shooting / playback / menu
Operation
" / low power mode"
EN
".