Quest (without NAV or rear seat
entertainment) 2011-2012
1. Unclip and remove the panels from
the bottom left and right side of the
center console. (Figure A)
2. Remove (2) clips per side exposed
behind lower panels. (Figure B)
(Figure A)
Dash Disassembly
(Figure B)
(Figure C)
®
99-7614
3. Unclip and pull center console
toward rear of vehicle.
Note: You do not have to fully
remove console. (Figure C)
4. Unclip and remove the trim panel
to the left of the shifter housing the
start/stop button. (Figure D)
5. Unclip and remove the panel on
the end of the passenger side of
the dash. (Figure E)
Continued on the next page
4
(Figure D)
(Figure E)