AIPTEK USBVID 044e&PID 3001 Manual página 6

6. When the "Driver Signature Notice" dialog box appears (see
Figure 3), click "OK" to continue.
7. If your USB Adapter has not been plugged into a USB port, the
following message will be shown. Click "Cancel" to continue. (see
Figure 4)
8. Click "Finish".
9. Click "Yes" to restart Windows. (see Figure 5)
Step 2. Inserting Bluetooth USB Adapter
1. Insert Bluetooth USB Adapter into a free USB port.
2. Windows should inform you that new hardware has been found.
Then the installation will continute automatically (see Figure 6). If
you insert the Bluetooth USB Adapter correctly, you will see LED
lighting, and it will flash when data has been transmitted.
Figure 3
Figure 4
Figure 5
UK
UK UK