Getting Started; Step 1: Charging The Battery Pack - Sony HDR-CX100 Guía De Operaciónes

Getting started

Step 1: Charging the battery pack

1
2
Battery pack
You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your
camcorder.
You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder.

1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Be sure that the  mark on the DC plug is facing right.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
3
3
DC plug
AC Adaptor
Power cord
(Mains lead)
CHG (charge)
lamp
DC IN jack
To the wall outlet
(wall socket)
US
1