Appendix A; A.1 I/O Connections And Wiring; Table A- 1 Part Numbers And Connection Diagrams; Table A- 2 Fug1010 Input/Output Wiring (Tb1) - Siemens SITRANS FUG1010 IP65 NEMA 7 Compact Guia De Inicio Rapido

Appendix A

A.1 I/O Connections and Wiring
Terminal Block Wiring - 1010DXS2-7
(Refer to manual drawing 1010DXS2-7 sheet 3 of 4. When Barriers are used, isolation is
limited to the Barrier's working voltage. Refer to table on manual drawing 1010-341 sheet 3).
These connection diagrams apply to the part numbers listed below.
Table A- 1
FUG1010
Table A- 2
Pin#
SITRANS FUG1010 Quick Start
Operating Instructions (Compact), 1/2009, CQO:QSG005 Revision B
Part Numbers and Connection Diagrams
FUG1010 Input/Output Wiring (TB1)
Signal
1 Io2- Isolated Loop Return
2 Io2+ Isolated Loop Supply
3 Io1 - Isolated Loop Return
4 Io1 + Isolated Loop Supply
5 ANIN 2 4-20mA Input CH. 2
6 ANIN 1 4-20mA Input CH.1
7 Status -1 Status Bit Return
8 Status +1 Status Output
9 Status -2 - Status Bit Return
10 Status +2 Status Output
1010DXS2-7 (Sheet 3 of 4) Drawing
7ME3611a-bc
where:
b= 1
c= D
Function
Spannable 4-20mA output proportional to any
available data variable assigned under menu
control
4-20mA input non-isolated)
CH. 1 Status Alarm Emiter
CH. 1 Status Alarm Collector
CH. 2 Status Alarm Emiter
CH. 2 Status Alarm Collector
A
Description
39