Before Switching Off The Power - SKP Pro Audio DMP8006 Instrucciones Operativas

BEFORE SWITCHING OFF THE POWER

When you have finished using the CD player, before switching off the power, be sure that the disc holder had
been closed with the OPEN/CLOSE button.
CAUTION:
Do not forcibly close the disc holder when the power is off.
Do not switch off the power when the disc holder
is open.
POWER OFF
SPECIFICATIONS
APPLICATION
POWER SOURCE
DIMENSIONS
WEIGHT
AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47KOHM)
ITEM
OUTPUT LEVEL
CHANNEL BALANCE
FREQUENCY RESPONSE
DE-EMPHASIS
CHANNEL SEPARATION (*2) 99dB
THD+N (*1)
S/N (*2)
Note: *1: WITH 20KHz LOW PASS FILTER.
*2: WITH 20KHz LOW PASS FILTER AND "IHF-A" WEIGHTED.
SEARCHING TIME (TEST DISC: TCD-792)
ITEM
SHORT ACCESS TIME
LONG ACCESS TIME
Model MCD3000, Dual CD player with wired remote control.
AC 115/230V, 60/50Hz, 26Watts
Main Unit 482(W)x 88.8(H)x 262.5(D)mm
Control Unit 482(W)x 88.8(H)x 94 (D)mm
Main Unit 5.0 Kgs
Control Unit 1.6 Kgs
TYPICAL LIMIT
2VRMS +/-0.5dB 2VRMS +/-1dB
WITHIN 0.2dB WITHIN 1dB
20-20KHz +/-0.4dB 20-20KHz +/-1dB
-20dB+2.4/-0dB -20dB+3/-0dB
90dB
0.0052% 0.01%
120dB 90dB
TYPICAL LIMIT
2Sec 4Sec
4Sec 6Sec
9
To avoid damage, please don't switch off the power
until ".no disc" or "time code" is showed on the LCD
after the disc holder has been closed with the
Open/Close button.
POWER OFF
CONDITION
1KHz, 0dB
1KHz, 0dB
0dB OUTPUT
16KHz,-20dB
1KHz, 0dB
1KHz, 0dB
1KHz, 0dB
CONDITION
PLAY NEXT TRACK
TRACK 1 TO 20,20 TO 1