Controls And Functions - SKP Pro Audio DMP8006 Instrucciones Operativas

CONTROLS AND FUNCTIONS

If the track is playing and this search function
is not active, the jog wheel temporarily bends
the pitch of the music up to+/-10% by rotating
the wheel clockwise to speed it up or counter-
clockwise to slow it down. The amount of pitch
change is determined by the speed of rotation.
If the search function is active, you will be able
to search at a higher speed through the current
track.
As the selected songs function: Whenever press
or button to select the desired song,
the search LED will show by blinking. You can
rotate the wheel to select song when the LED
is blinking. The search LED will continue to
blink until the selected song is finished.
9. IN button: Allows you to set the cue point without
stopping the playback (CUE ON THE FLY). This
button also sets the beginning of a seamless loop.
When the button contains a cue point it lights up.
10. OUT button: Used to set the end point when
looping music. The player starts to loop
seamlessly until you press this button again to
exit. When a loop is programmed but not active
you can also restart the loop. The point where
you press the button will be memorized as the
new end point of the loop.
11. RELOOP / STUTTER button :This button has 2
functions:
Reloop: When a loop was programmed and you
have hit the OUT button, press the RELOOP/
STUTTER button to enter the loop again. To exit
the loop presses the OUT button.
Stutter: When a loop is playing you can press this
button to restart the loop at once. You can also
press this button when a track is not playing in loop.
Every time the RELOOP/STUTTER button is
pressed, it will restart the music from the pre-
programmed cue point. The stutter effect adds
extra creativity to your performance.
12. TRACK search buttons: These buttons are
used to select the track to be played forward skip
& backward skip.
13. FOLDER button: This button is used to toggle
between folders and tracks. Press this button to
show the folder that is playing in the LCD. This
button is only for Mp3 discs.
14. TAP/BPM button
TAP/BPM button: The unit has a full automatic
BPM-counter. In some rare cases the automatic
beat counter doesn't count as it should do (beat are
out of the normal range or there' s simply no beat
to detect) In these cases you can help the beat
counter by manually tapping this button to the rhythm
of the beat.
Switching between BPM and PITCH display:
standard the display is set to PITCH mode, When-
ever press TAP/BPM button in order to look over
the function of automatic BPM or manual BPM for
the first time, BPM/PITCH METTER content on LCD
is BPM value, show time for about 3 seconds and
get back to PITCH and show automatically promptly.
Switching between automatic BPM and manual
BPM: Press and hold the TAP/BPM for about 1 sec
to turn the automatic BPM function on and off.
15. CUE button: Pressing the CUE button during
playback provides an immediate return to the
position at which play was started. Playback starts
immediately from the programmed cue point for
as long as the CUE button is pressed. The CD
player jumps back to the cue point as soon as the
CUE button is released.
Also with the unit in pause mode (Play/Pause button
blinks) the jog wheel is used to set a different start
point. By pressing "PLAY/PAUSE" or "IN" button
followed by "CUE", you can confirm this new cue
point.
16. PLAY/PAUSE button: Every time you press the
PLAY/PAUSE button the CD player changes from
play to pause or from pause to play. The button
blinks as long as the player is set to pause.
17. SEARCH buttons
This search button allows you to quickly
scan backwards through a track.
This search button allows you to quickly
scan forwards through a track.
18. PITCH button: This button is used to turn the
speed function on and off. You can also select 3
different pitch ranges (+/-4%, 8%, 16%): every
time you press the "-" button shortly while you
keep the PITCH button pressed, you will change
the pitch range. When the pitch range of +/-
100%(CD-A only) is selected, the 4%, 8% and
16% LEDs will be illuminated.
19. PITCH BEND buttons: The speed rises while the
"+button" is pressed and returns to the original
pitch when the button is released. The speed
drops when the "–button" is pressed and returns
to the original pitch when the button is released.
These buttons can be used to synchronize the
beats of 2 tracks.
20. CONTROL START sockets: If you are using a
mixer with fader start function, connect the player
with the fader start of the mixer. Please note that
these sockets must never be connected with any
voltage.
21. CONTROL CONNECTOR: Connect the main
unit here, using the supplied mini-DIN cable.
5
Control unit