SKP Pro Audio DMP8006 Instrucciones Operativas página 4

FEATURES
Auto cue
Pitch Bend
Pitch display
Auto/manual BPM
Single/Continuous
Plays MP3 and CD discs
8 times over sampling 1 bit D/A converter
Seamless Loop (uninterrupted loop playback)
Selectable elapsed, remain and total remain time display
Relay play allow consecutive playback during two decks
Instant start within 10ms (sound is produced immediately when the PLAY button is pressed)
Adjustable pitch percentages: +/-4%,+/-8%,+/-16%,or +/-100% (+/-100% can only be done with actual music
CDs)
CONTROLS AND FUNCTI
1. POWER SWITCH button: When the power switch
is pressed, the power turns on and the led is lit.
2. OPEN/CLOSE button: Press this button to open
and close the disc tray. This button is disabled
during playback.
3. DISC tray: Use the OPEN/CLOSE button to
open disc tray and put the CD in place. If the tray
is not closed after 60 sec, it will close
automatically to prevent damage.
4. AUDIO OUTPUTS: Output for the audio signals is
from each player. Use the supplied RCA cables to
connect these outputs to the CD/line inputs of
your mixing unit.
4 5
Digital out
Folder Search
Frame search
Relay playback
4 fast search mode
Transport protection
10 seconds Anti Shock Protection (per side)
1 2 3
6 8
7
5. DIGITAL OUT socket: Use this connector to
connect the digital signal (S/PDIF format) to the
input of a digital amplifier or digital recorder (ex.
Mini disc)
6. VOLTAGE selector: 115V AC and 230V AC
switch.
7. POWER connector: This is the main power
connection. Only use the supplied power cord.
Use of any other power may result in sever
damage to the unit. Be sure the local power
matches the unit's required power.
8. CONTROL connector: Use the supplied mini-
DIN cable to connect this output to the control
unit.
3
Main unit
4
5