SKP Pro Audio DMP8006 Instrucciones Operativas página 7

CONTROLS AND FUNCTIONS
4
3
2
1
19
1. AUTO CUE : This will indicate if the Auto Cue is
on or off. Press and hold the SGL/CTN for 1 sec.
to turn the Auto Cue function on and off.
2. TRACK INDICATOR:
details a current track. The number displayed in
the track indicator is a direct reference to a track
being selected a track in play, pause, or cue
mode.
3. FOLDER/TRACK INDICATOR: This indicator
shows you if you are looking at the track number
or the folder number.
4. PLAY / PAUSE INDICATOR: When the unit is in
play mode the "PLAY" indicator will glow, when
the drive is in pause mode the "PAUSE" indicator
will glow.
5. CUE INDICATOR: This indicator will glow when
the unit is in CUE mode and will flash every time a
new CUE POINT is set.
6. SINGLE INDICATOR: This indicates that the CD
drive is in single play mode, the track will play
once and return to CUE mode. If the single
indicator is not on the unit is in continuous mode
the drive will play all the remaining tracks on the
disc until you stop it or power is interrupted.
7. MP3 INDICATOR: This will indicate that a Mp3
disc is loaded in the drive.
8. TIME BAR INDICATOR: This bar gives a visual
approximation of a track's or disc's remaining
time. This bar will begin to flash when a CD is
ending or a track if the unit is in "SINGLE" mode.
9. LOOP INDICATOR: Appears when the CD is
repeating a particular area with the music on the
CD.
6
5 7
18 17 16
This 3-digit indicator
8
14
15
10. RELOOP INDICATOR: Appears when the CD
has had a loop set previously and can go back to
loop again.
11. PITCH INDICATOR: Indicator will light up when
the Pitch is activated.
12. BPM / PITCH METER: Shows either the
percentage change in pitch or the BPM of the
song. The meter will display either the BPM's of
the current track or the pitch percentage applied
by the PITCH SLIDER.
13. BPM INDICATOR: Indicator will light up when
TAP/BPM button is engaged.
14. TIME DISPLAY: These indicators detail the
Minutes, Seconds, and Frames. The meter will
display either the elapsed time, or remaining time
of a track. The time displayed in the meter will
directly reflect the time indicator.
15. CHARACTER DISPLAY: This will display the
name of the file, artist, and title when a Mp3 disc
is loaded.
16. TOTAL REMAIN INDICATOR: When "TOTAL"
and "REMAIN"
DESCRIBED in the LCD will define the total disc
remaining time.
17. REMAIN INDICATOR:
indicated in the LCD DISPLAY the TIME
DESCRIBED in the LCD will define the current
track's remaining time.
18. ELAPSED INDICATOR: It is for showing time as
it is taking place.
19. AUTO BPM: This will indicate that the AUTO
BPM counter is active.
6
LCD display
10
9
12
13
are indicated the
When "REMAIN" is
11
TIME