VOLTOMAT HEATING QH-104263.4 Manual De Instrucciones página 83

shorter screwdriver in order to get into the space of the wall mount structure more easily.
7. Swing the heater on the wall all the way up, and then tighten with two screws at the bottom of the wall
mount. (See Fig. 6) Now the heater is securely fixed to the wall.
8. Swing the heater to the mid-way of its swing range. Replace the wall mount cover from the top.
9. Fasten the cover with the two screws.
10. Now you can use the quartz heater.
OPERATION
1. Connect the heater to an appropriate power outlet.
2. Pull the cord switch downwards to turn on or off the heater. Pull it once or several times, the state of
heater changes in a circle as "600W heat setting ("1" shown on the indicator) "  "1200W heat setting
("2" shown on the indicator) "  "OFF ("0" shown on the indicator) "  "600W heat setting ("1" shown
on the indicator) "  ...
Note:
When the heater is turned on for the first time or after having not been used for a long time, it is

normal to emit some smell and fume, which will disappear when the heater has been on for a short
while.
The supply cord must not contact the metal enclosure when the heater is being used.

CLEANING
Before cleaning, first disconnect the heater from power supply.

Let the quartz heater cool down and clean it only with dry cloth. Do not touch the quartz tubes with

your fingers!
Never use water and never touch the heater with wet hands.

Fig.5
- 82 -
Fig.6