exonda OT10 Manual De Instrucciones página 15

DANGER! Risk of injury from cutting
Do not use the appliance with a damaged or fractured cutter head.
The cutter head must not be disassembled.
While the appliance is switched on, do not touch the cutter head.
The appliance must be switched off:
– when mounting or removing an attachment comb.
– when you put down the appliance, e.g. when you interrupt the cutting pro-
cess briefly.
– before removing or mounting the cutter head,
– before cleaning the appliance.
Use only the original attachment combs.
Do not use a damaged attachment comb.
WARNING! Risk of material damage
The cutter head is a precision part. Protect it against damage.
In order to avoid increased wear of the cutter head and motor, the cutter head
must be cleaned and oiled regularly (see "Cleaning and care" on page 15).
Do not use any sharp or abrasive cleaning agents.
Protect the appliance against heat (e.g. direct sunlight), chemical substances
(e.g. perm agents) and mechanical damage (e.g. by dropping).
Specifications according to Machinery Directive 2006/42/EC
A-weighted emission sound pressure level at workstations at a distance of
1 m, L pA ≤ 70 dBA
measured maximum noise emission value, including uncertainty of measurement
according to EN ISO 4871. Determination of the values according to EN 60704-2-9
with reference to EN 60704-1
Vibration total value to which the hand-arm system is subjected,
2
a h < 2.5 m/s
measured maximum vibration total value including uncertainty of measurement.
Determination of the values according to EN ISO 5349-1/2
Designation of the Parts
1 Charge contacts
2 Charging station
3 Charge status display
4 On/Off switch
5 LED lighting
(only model OT11B)
6 Cutter head
7 Charge contacts of the appliance
8 Plug-in power supply device
(model T10)
9 Release key
10 Mains plug adapter (replaceable,
figure: EURO version)
11 Connecting cable
12 Comb attachment
13 Oil bottle
14 Cleaning brush
15 Allen key
(in base of the charging station)
(only model OT10)
16 Mounting screw for cutter head
(only model OT10)
ENGLISH 13