Getting Started - Asus ROG Strix Carry Manual De Instrucciones

Getting started

Installing the batteries to your gaming mouse:
1. Lift the top cover from the rear of your gaming mouse
to remove the top cover.
2. Install the two (2) bundled AA batteries into the battery
compartment of your ROG STRIX CARRY Gaming
Mouse.
3. Replace the cover on top of your gaming mouse, then
push down on the left and right mouse buttons to
secure the top cover.
CAUTION!
• Ensure the batteries are installed in the correct
orientation, refer to the direction indicated in
the battery compartment.
• If you wish to replace the dongle, ensure that it
is inserted in the correct orientation.
• The bundled batteries are non-rechargeable.
• DO NOT mix new batteries with old batteries.
IMPORTANT
• Only use alkaline batteries when installing
batteries to your gaming mouse.
• We recommend you remove the batteries from
your gaming mouse if the gaming mouse will
not be in use for a prolonged period of time.
Refer to the table below for the battery status of your ROG STRIX CARRY Gaming Mouse.
LED color Duration
Green* Lights up for 5 seconds
Red Blinks twice every 0.5 seconds
* The LED indicator will light green only when you set the connection mode to RF 2.4G Wireless mode, or when
setting to Bluetooth mode after the gaming mouse has already been paired.
To connect your ROG STRIX CARRY Gaming Mouse:
Using the RF 2.4G Wireless mode
1. Connect the bundled USB dongle to your computer's USB port.
2. Set the connection switch to the RF 2.4G Wireless mode.
3. Your gaming mouse should automatically start pairing. Once your gaming mouse has been
successfully paired, the LED indicator on your gaming mouse will light up green for 5 seconds.
4
Description
Battery Power 25% - 100%
Battery Power under 25%
Quick Start Guide