Figure 16: Removing The Cover From The Post; Figure 17: Positioning The Sc Connector; Figure 18: Securing The Cable In Position - Allied Telesyn AT-iMG606BD Guia De Instalacion

Chapter 2: Installation
38
12. Remove the cover from the post, as shown in
Figure 16.
Figure 16. Removing the Cover from the Post
13. Position the SC connector in the slot of the post so that
the key is facing up, as shown in Figure 17.
Figure 17. Positioning the SC Connector
14. Replace the cover on the post to secure the cable in
position, as shown in Figure 18.
Figure 18. Securing the Cable in Position
392
393