GYS STARTPACK PRO 12.24 Manual De Instrucciones página 11

Translation of the original instructions
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-circuiting.
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid, rinse the
affected part of the body with plenty of water and seek immediate
medical assistance.
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting the
device to/from the battery.
• The terminal of the battery that is not connected to the car frame
must be connected first. The other connection must be made on the
car frame, far from the battery and the fuel line. The battery charger
must be connected to the power supply network.
Connection:
• This device must be connected to an earthed power supply.
• This machine is fuse-protected.
Connection to the mains must be made according to the national
installation regulations.
Maintenance:
If the power supply cable is damaged, it must only be replaced by
a cable specified or supplied by the manufacturer or its after-sales
service.
• Service should be performed by a qualified person
Warning! Always remove the power plug from the wall socket before
carrying out any work on the device.
• If the internal fuse is blown, it must be replaced by the manufacturer,
its after-sales service or an equally qualified person.
• Regularly take off the cover and remove dust with an air gun. Take
the opportunity to have a qualified person check the electrical
connections with an insulated tool.
• Under no circumstances should solvents or other aggressive cleaning
agents be used.
• Clean the device's surfaces with a soft, dry cloth.
STARTPACK PRO 12.24
EN
11