Mitsubishi Electric PAR-W21MAA Manual De Instrucciones página 19

[Function selection flowchart]
[1] Stop the unit to start remote controller function selection mode.
[5] Setting completed. [6] Change the display to the normal one. (End)
Normal display (Display when
the unit is not running)
(Hold down the E button and press the D button for two seconds.)
* The display cannot be changed during the test run and the
self diagnosis.
Item 1
Press the G button.
Change Language
("CHANGE LANGUAGE")
Press the
E button.
Function limit
("FUNCTION
Press the
SELECTION")
G button.
Press the Press the
E button. E button.
Press the
G button.
Mode selection
("MODE
SELECTION")
Press the
E button.
Press the
G button.
Display change
("DISP MODE
SETTING")
[2] Select from item 1.
Remote Controller Function
Selection Mode
Item 2
Operation function limit setting ("LOCKING FUNCTION")
Operation mode skip setting ("SELECT MODE")
Temperature range limit setting ("LIMIT TEMP FUNCTION")
Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
Use of clock setting ("CLOCK")
Timer function setting ("WEEKLY TIMER")
Contact number setting for error situation ("CALL.")
Temp off set setting ("TEMP OFF SET FUNCTION")
Temperature display °C/°F setting ("TEMP MODE °C/°F")
Water temperature display setting ("WATER TEMP DISP SELECT")
[3] Select from item 2.
(Hold down the E button and press the D
button for two seconds.)
* The remote controller records the setting
that is made in this way.
See [4]–1
(Setting content)
See [4]–2. (1)
Press the
Press the G button.
D button.
See [4]–2. (2)
See [4]–2. (3)
Press the
D button.
See [4]–3. (1)
Press the G button.
See [4]–3. (2)
See [4]–3. (3)
See [4]–3. (4)
See [4]–3. (5)
Press the
D button.
See [4]–4. (1)
Press the G button.
See [4]–4. (2)
– 19 –
[4] Make the setting. (Details are specified in item 3)
NOTE
Timer operation stops when the display
for remote controller function selection is
changed to the normal one.
Item 3
Dot display
The language that is selected in
CHANGE LANGUAGE mode
appears on this display. English is set
in this manual.