Screen Configuration; Setting The Day Of The Week And Time - Mitsubishi Electric PAR-W21MAA Manual De Instrucciones

3

Screen Configuration

<Screen Types>
Function Selection of remote controller:
Set the functions and ranges available to the remote
controller (timer functions, operating restrictions, etc.).
Set Day/Time: Set the current day of the week or time.
Standard Control Screens: View and set the unit's operation status.
Timer Monitor: View the currently set timer (weekly timer, simple timer,
or Auto Off timer)
Timer Setup: Set the operation of any of the timers (weekly timer,
simple timer, or Auto Off timer).
Function Selection of remote controller
A
Standard Control Screens
OFF
B
Timer Monitor
<How to change the screen>
A : Hold down both the Mode (Return) button and the Timer ON/OFF button for 2
seconds.
B : Press the Timer Menu button.
C : Press the Mode (Return) button.
D : Press either of the Set Time buttons (
Set Day/Time
D C
ON
C
Timer Setup
B
or ).
4

Setting the Day of the Week and Time

Use this screen to change the current day of the week and time setting.
Note:
The day and time will not appear if clock use has been disabled at Function Selection
of remote controller.
<How to Set the Day of the Week and Time...>
Set Time button a to show display 2.
1. Press the or
2. Press the Timer ON/OFF (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun
3. Press the appropriate Set Time button a as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in minute
intervals, then in ten-minute intervals, and then in one-hour intervals.
4. After making the appropriate settings at Steps 2 and 3, press the CIR.WATER
button 4 to lock in the values.
– 6 –
Day of the Week &
Time display
Day of the Week Setting
Time Setting
Mon ... Fri Sat.