Technical Data; Special Safety Instructions - Grouw 78472 Manual De Instrucciones

CHAINSAW
Introduction
To get the most out of your new chainsaw,
please read through these instructions
before use.
Please also save the instructions in case you
need to refer to them at a later date.

Technical data

Voltage/frequency:
Power rating:
Blade: 16" Oregon (160SDEA041)
Max. cutting width:
Chain:
Chain speed:
Chain pitch:
Thickness of the drive link:
Chain wheel:
Net weight without blade/chain:
Oil tank capacity:
With automatic chain lubrication and SDS
adjustment of saw chain
Noise:
L :
pA
L : L L 102.8 dB(A) K
WA WA
Vibrations:
Front handle:
Rear handle:
48
230-240 V ~50 Hz
1,800 W
38 cm
Oregon (91PJ056X)
13.5 m/s
9.525 mm (3/8")
1.27mm (0.05")
6 teeth
4.9 kg
150 ml
105 dB(A)
90.9 dB(A) K : 3 dB(A)
pA
: 2.4 dB(A)
WA
3.707 m/s K: 1.5 m/s
2
3.597 m/s K: 1.5 m/s
2
About the vibration value
The table shows how long you may be
exposed to vibration every day, if the
vibration load of 2.5 m/s
exceeded:
Vibration
2.5 m/s
2
3.5 m/s
2
5.0 m/s
2
7.0 m/s
2
10.0 m/s
2

Special safety instructions

Safety directions for using the chainsaw
Always be sure to wear appropriate personal
protective equipment when working with
the chainsaw:
• Safety trousers with anti-cutting
protection manufactured and approved
in accordance with EN381-5.
• Safety shoes with anti-cutting protection
manufactured and approved in
accordance with EN17250:2004.
• Safety helmet manufactured and
approved in accordance with EN397.
• Goggles manufactured and approved in
accordance with EN166.
2
• Hearing protection manufactured and
2
approved in accordance with EN352.
• Protective gloves suitable for forestry
work.
is not to be
2
Maximum time
8 hours
4 hours
2 hours
1 hour
30 minutes