Assembly And Preparation - Grouw 78472 Manual De Instrucciones

Assembly and preparation

Fitting the blade and chain
Pull the protective shield (5) in the direction
of the front handle to ensure the chain brake
is not activated.
Remove the screw (A) on the cover (1).
Turn the � nger screw (2) to the unlocked
padlock symbol and lift the cover (1) off .
1
A
Place the saw chain (14) around the blade
(13). Make sure that the teeth point in the
direction of rotation.
52
2
Tighten the saw arm up so that its link
engages in the groove on the blade, forming
a loop behind the blade.
Place the saw chain around the chain wheel
(11) and place the blade down against the
chainsaw so that the chain tensioner bolt
(10) goes into the hole in the blade and the
guide bolt (9) goes into the oblong grove on
the blade.
Put the cover (1) in place and turn the � nger
screw (2) to the locked padlock symbol to
tighten it securely.
Screw the screw (A) � rmly on again.