O
PERATING THE UNIT
Before you switch the unit on, you must set the rotating
speed (rotary knob (F)) to zero.
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
wall socket.
A. Insert the power adapter (C) into the power socket and the
power adapter plug (A), on the back of the device, into the
provided power adapter socket (B).
B. Select a suitable grinding head. Insert the grinding head into
the grinding head holder (G) at the front of the handpiece.
The mechanism locks automatically as soon as the grinding
head starts to rotate. Never use force to remove or insert
a grinding head! Grinding heads with a shaft diameter of
2.332 mm to 2.350 mm (0.091 to 0.093 inches) fit exactly into
the grinding head holder without you having to use excessive
force. Please switch off the appliance for removing an abrasive.
Now remove the abrasives by simply pulling out straight.
C. In order to switch on the appliance, press the on-off switch (D)
until it engages, the power LED (E) must now glow green.
D. Control of the rotation direction and speed:
1. Selection of the rotation direction:
You can make this choice by appropriate button on the
clockwise/ anticlockwise/ standby button (I).
Switch setting L: The motor runs in counterclockwise direction
(to left)
Switch setting R: The motor runs in clockwise direction
(to right)
Switch setting O: The motor stops (the appliance is in standby-
mode)
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI