Using The Appliance; Troublesshootings - TEFAL Direct Serve Manual Del Usuario

USING THE APPLIANCE

Before using the appliance for the first time,
wash the parts which will be in contact with
food.
- Cut the citrus fruits in half.
- Plug in your appliance;
- Place a glass under the pouring spout (C).
- Please ensure that the pouring spout is
correctly positioned (down position) (fig. 1)
CLEANING
- Once you have unpacked your appliance
and before using it for the first time, clean all
parts.
- Clean the motor unit (A) with a damp cloth.
- Do not immerse the appliance in water.
- All the other parts (transparent bowl (D),
stainless steel filter (E), cone (F) and protective
cover (G) can be washed under the tap or in
a dishwasher (upper tray) (fig. 4, fig. 5).

TROUBLESSHOOTINGS

PROBLEM
The appliance
* The plug is not connected
does not work
* The voltage isn't accordance with the standard
of input power
* Power doesn't switch on due to improper
contact between the cone and contact
* Motor fuse has blown resulting from the overload
If you have followed all of these instructions carefully and your appliance still doesn't work, please
contact your nearest dealer or authorised repair centre.
DISPOSAL OF ELECTRICAL OR ELECTRONIC APPLIANCES
4
CAUSE
Environment protection first!
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point
- Remove the protective cover (G) and gently
press the cut fruit onto the cone (F) (fig. 2);
this will start the appliance.
When the fruit is no longer in contact with the
cone the appliance will stop automatically. You
may hear a slight noise when the applicant
stops, this is quite normal.
- After use, immediately clean the various parts
under the tap or in a dishwasher so that the
pulp doesn't remain stuck on them.
- Never use bleach or an abrasive sponge.
Connect the appliance to a socket with
the same voltage.
Check supply voltage for 230V.
Try to press down the cone.
Contact your nearest dealer or repair
centre. The fuse can also be replaced
by a qualified electrician.
SOLUTION