Conceptronic C300GBRS4 Manual Del Usuario página 47

The WPS Wizard will be shown on your screen:
In this Wizard, you can activate the Pin Code feature. To start with the Pin Code authentication, you need
the Pin Code generated by your Wireless Client.
F. Select the WPS Pin Code feature in the software of your Wireless Client. The Wireless Client will
generate a Pin Code and show it on your screen.
[Wireless Client Software]
G. Enter the Pin Code given by your Wireless Client in the WPS Wizard of the C300GBRS4 and press
"Connect".
The C300GBRS4 will activate WPA Security on your wireless network and accept the wireless connection of
your Wireless Client with the entered Pin Code.
The C300GBRS4 will keep the WPS authentication active for 120 seconds. During this process, the WPS LED
will blink. If there is no connection in these 120 seconds, the LED will turn off and the WPS authentication
process is stopped.
[C300GBRS4 WPS Wizard]
ENGLISH
G
47