Setting Up Virtual Server Rules - Conceptronic C300GBRS4 Manual Del Usuario

The Conceptronic C300GBRS4 is equipped with a built-in Firewall to prevent attacks from the Internet on
your network. This Firewall automatically blocks all incoming traffic on unused ports. When a blocked port
is needed for a service or application (for example: a FTP Server or WEB Server) you can create a Virtual
Server Rule in the Configuration Pages to forward the traffic.
Below you will find a list of some common used ports and their corresponding application:
Poort Application
20 FTP Data (FTP Server)
21 FTP Data (FTP Server)
22 SSH (Secure Shell)
23 Telnet
25 SMTP (Mail Server – outgoing)
For more ports and their corresponding applications, see: http://portforward.com/cports.htm
Note: When you are using an application which supports UPnP Port Mapping, the router can be
automatically configured by the application when needed. In that case, you don't need to setup
your port mappings manually.
Note: When using Virtual Server rules, it is advised to configure the computer(s) with a Fixed IP Address
instead of a Dynamic IP Address.
Note: For detailed information about the Virtual Server and DMZ options, see the User Manual (English
only!) on the Product CD-ROM. Please select "View User Manual" from the Autorun Menu.
A. Open your web browser (like: Internet Explorer, Firefox, Safari or Chrome).
B. Enter the IP address of the device in the address bar of your web browser (By default:
http://192.168.0.1/).
The Login page of the C300GBRS4 will be shown.
C. Enter the Username and Password (Default: 'admin' and 'admin') and click "Submit" to enter the
web configuration.

7. Setting up Virtual Server rules

C
Poort Application
80 HTTP (Web Server)
110 POP3 (Mail Server – incoming)
2000 Remotely Anywhere
5800 VNC
5900 VNC
C
ENGLISH
49