Technical Specifications - Elta 4259 Manual De Instrucciones

02-4259-GB.qxd 10/19/06
TIP
There are two possibilities to mount the unit under the kitchen cabinet.
Method (A)
1. Mount the plastic pipes together by snapping the pipes in the holes of
the border.
2. Turn the long screws (x4) in the pipes and through the border. Then
mount the border with the pipes below the kitchen cabinet.
3. Install the unit by inserting the hook ahead the border towards (1).
4. Then press the unit towards (2) to the border.
5. To dismantle the unit press the hook locking behind the unit. Then do
steps (4) and (3) in reverse order.
Method (B)
1. Turn the long screws (x4) in the border. Then mount the border below
the kitchen cabinet.
2. Install the unit by inserting the hook ahead the border towards (1).
3. Then press the unit towards (2) to the border.
4. To dismantle the unit press the hook locking behind the unit. Then do
steps (3) and (2) in reverse order.
Using the unit as a table radio-clock
1. It is also possible to use the unit with the S S t t a a n n d d F F e e e e t t ( ( 1 1 9 9 ) ) .
Attention!!
- Your unit must not be exposed to rain, direct sun-light or high temperature!
- Your unit must only be repaired by a qualified specialist.
VENTILATION WARNING!!
The normal ventilation of the product must not be impeded for intended use.
DRIPPING WARNING!!
The product must not be exposed to dripping or splashing. No objects filled with liquids, such as vases, may be placed
on the product
All subjected to change for improvement without any notice.

TECHNICAL SPECIFICATIONS

Power source
Radio frequency bandwidth
10.
3:10 PM Page 10
: Mains connection: 230V ~ 50Hz
Back-up battery: DC 3 V (2 x 1,5V UM-4) Batteries (not included)
: FM 87.5 - 108 MHz