Winter Storage; Cleaning; Cleaning The Filter Balls - Steinbach Active Balls 50 Manual Original

Winter storage

Always store the dried filter medium separately from the filter vessel in the
winter.
1. Press the ON/OFF button
2. Pull the power plug of the pump
3. Close the shut-off valves or block the water flow to the pool's connecting hoses.
4. Uninstall the connecting lines to the pool and drain the hoses.
5. Loosen the drain screw
6. Remove the filter medium (see the "Exchanging the filter medium" section).
If you are using filter balls, wash them by hand and let them dry completely.
7. Rinse the filter system with tap water.
8. Let the filter system dry completely.
The device can be stored over the winter.

Cleaning

Improper cleaning might damage the device.
- Clean the surface of the device with plain water after each use.
- Do not use any aggressive cleaning agents.
- Do not use any sharp or metal objects such as knives, hard
scrapers or similar.
- Do not use any cleaning brushes.
- Do not use a high-pressure cleaner.

Cleaning the filter balls

Never clean the filter balls in the washing machine or tumble dryer!
Clean the filter balls in the sink under running water or use a garden hose.
If the cleaned filter balls no longer clean the pool water sufficiently, exchange the filter
balls.
52
to switch off the pump
30
.
10
on the pump housing and completely empty the pump.
24
NOTICE!
.
10