Invacare 6007 Instrucciones De Montaje, Instalación Y Funcionamiento página 2

INSTALLING SNAP SUPPORTS INSTALLING SNAP SUPPORTS INSTALLING SNAP SUPPORTS
INSTALLING SNAP SUPPORTS INSTALLING SNAP SUPPORTS
- SINGLE RELEASE WALKERS - SINGLE RELEASE WALKERS
- SINGLE RELEASE WALKERS - SINGLE RELEASE WALKERS - SINGLE RELEASE WALKERS
ONLY (FIGURE 2) ONLY (FIGURE 2) ONLY (FIGURE 2) ONLY (FIGURE 2) ONLY (FIGURE 2)
NOTE: Refer to the WARNINGS in the SAFETY
SUMMARY of this instruction sheet.
1. Locate the upper hole in the tray side
brace that is marked "2".
2. On the INSIDE of the tray side brace,
attach the snap support into the location
determined in STEP 1. Refer to FIGURE 2.
3. Repeat for opposite tray side brace.
4. Proceed to INSTALLING THE O-RINGS
ONTO THE TRAY LINKS in this instruc-
tion sheet.
Snap Support
FIGURE 2 - INSTALLING SNAP
SUPPORTS - SINGLE RELEASE
WALKERS ONLY
INSTALLING THE O-RINGS INSTALLING THE O-RINGS INSTALLING THE O-RINGS
INSTALLING THE O-RINGS INSTALLING THE O-RINGS
ONTO THE TRAY LINKS ONTO THE TRAY LINKS
ONTO THE TRAY LINKS ONTO THE TRAY LINKS ONTO THE TRAY LINKS
(FIGURE 3) (FIGURE 3) (FIGURE 3) (FIGURE 3) (FIGURE 3)
NOTE: Refer to the WARNINGS in the SAFETY
SUMMARY of this instruction sheet.
1. Install the four (4) O-rings over the ends
of the walker tray links as shown in
FIGURE 3.
WALKER TRAY
O-Rings
FIGURE 3 - INSTALLING O-RINGS
ATTACHING THE WALKER ATTACHING THE WALKER
ATTACHING THE WALKER ATTACHING THE WALKER ATTACHING THE WALKER
TRAY TO THE TRAY SIDE TRAY TO THE TRAY SIDE TRAY TO THE TRAY SIDE
TRAY TO THE TRAY SIDE TRAY TO THE TRAY SIDE
BRACES (FIGURE 4) BRACES (FIGURE 4)
BRACES (FIGURE 4) BRACES (FIGURE 4) BRACES (FIGURE 4)
NOTE: Refer to the WARNINGS in the SAFETY
SUMMARY of this instruction sheet.
1. Place the walker tray onto the walker with
Upper Hole
Marked "2"
2. Insert and lock the tray links into the
Tray Side
Brace
NOTE: There are two (2) sizes of tray links. Refer to
the chart below and FIGURE 4 to determine tray link
size.
FOR DUAL RELEASE
FOR DUAL RELEASE
3. Repeat STEP 2 for the opposite tray links.
2
Short
Tray
Link
ONTO THE TRAY LINKS
the walker tray links positioned towards
the front of the walker as shown in
FIGURE 4.
following holes of the tray side brace as
shown in FIGURE 4.
SHORT TRAY LINK POSITIONING
FOR SINGLE RELEASE
WALKERS
SECOND HOLE
FROM TOP
(MARKED "2")
LONG TRAY LINK POSITIONING
FOR SINGLE RELEASE
WALKERS
FIFTH HOLE
FROM TOP
(MARKED " ")
Walker Tray
Long Tray Link
WALKERS
TOP HOLE
(MARKED "1")
WALKERS
FOURTH HOLE
FROM TOP
(MARKED "3")
Part No. 1089635