Team kalorik TKG OT 1017 Manual De Instrucciones página 12

Fax +32 2 359 95 50

in use. Never touch those surfaces during use nor before the
appliance has totally cooled down, and only handle the
knobs.
Make sure the hot parts of the appliance never come into

contact with inflammable materials, such as curtains, cloth,
etc. when it is in use, as a fire might occur. Also make sure
not to cover the appliance and do not put anything on top
of it. Make sure nothing comes into contact with the
heating element of the appliance.
Be extremely cautious as oil and fat preparations might

catch fire if overheated.
If you use the appliance under a cooking hob, make sure to

respect the minimum distance advised by the
manufacturer.
Unplug the appliance immediately if you notice a crack in

the oven door and have it repaired by a competent
qualified electrician(*).
Your appliance must never be switched on through an

external timer or any kind of separate remote control
system.
Please note: Should the symbol

certain surface, you need to be careful when handling the
product. This symbol means: CAUTION, this surface may get
very hot during use.
The symbol
temperature, however the other metallic or non-metallic
surfaces can also become very hot during use and it is
therefore advisable to always handle them with care and if
possible with the help of isothermal gloves or other thermal
protection. In case of doubt concerning the temperature of
a certain surface it is always preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The pages must be reproduced and folded in order to obtain a
booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,
make sure you keep the good numbering when you turn the pages
of the I/B. Don't change the page numbering. Keep the language
integrity.
is always put on the surface with the highest
12
Assembly page 12/67
be indicated on a
TKG OT 1017 - 140522