Din Radio Provision With Pocket; Iso Din Radio Provision With Pocket - Metra INST-3304 Instrucciones De Instalación

DIN radio provision with pocket

1. Slide the DIN cage into the radio housing
and secure by bending the metal locking
tabs down. (Figure A)
2. Slide the aftermarket radio into the cage
until the side clips engage. (Figure B)
3. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS.
4. Re-connect the negative battery
terminal and test the unit for proper
operation.
5. Reassemble dash in reverse order of
disassembly.
KIT ASSEMBLY 99-3304
(Figure A)
(Figure B)

ISO DIN radio provision with pocket

1. A ttach the ISO brackets to the
aftermarket radio with the screws
supplied with the unit. (Figure A)
2. Slide the aftermarket radio into the cage
until the side clips engage. (Figure B)
3. Snap the trim plate into the radio
housing. (Figure B)
4. Locate the factory wiring harness in the
dash. Metra recommends using the proper
mating adapter from Metra or AXXESS.
5. Re-connect the negative battery terminal
and test the unit for proper operation.
6. Reassemble dash in reverse order of
disassembly
(Figure A)
(Figure B)
REV. 8/27/2021 INST-3304
5