Operational Safety Guidelines - Motorola Solutions AAM36X501 Manual De Instrucciones

9. Operation of this equipment in a residential area has potential
to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
10. This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.

Operational Safety Guidelines

• This equipment is not suitable for outdoor use. Use only in dry
locations and conditions.
• Connect the power cord only to an appropriately fused and
wired AC outlet with the correct voltage, as specified on the
product.
• The AC outlet to which the power supply is connected should
be close and easily accessible.
• Make sure the power supply cord to the charger is located
where it will not be stepped on, tripped over, or subjected to
water, damage, or stress.
• Disconnect from line voltage by removing the power cord from
the AC outlet.
• Turn the radio off when charging the battery.
• Use only Motorola Solutions authorized adapter. Do not
connect an improper AC Adapter.
• The charger and/or AC Adapter will generate a moderate
amount of heat during the charging process. This is a normal
condition.
• The charger is designed for charging only and is not designed
for operation (transmit or receive) of the radio.
• The presence of nearby RF transmission can cause the LED
of the charger to inadvertently flash or change color. This
does not impact the charging process of the docked radios
and/or batteries (also exhibited at empty slots), and will cease
once the RF signal is no longer detected.
• If the LED indicator of the radio blinks red, reinsert the radio. If
the LED continues blinking red, the battery is faulty. Replace a
new battery for the radio.
2