System Overview; Before Installing The Adaptor; Parts Identifi Cation - Panasonic CZ-TACG1 Manual Del Usuario

Ocultar thumbs Ver también para CZ-TACG1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50

System Overview

CAUTION
Do not stand on an unstable surface when operating
or checking the adaptor.
- This can cause injury from falls.
Indoor unit
Network adaptor
Wireless LAN
CZ-TACG1

Before Installing the Adaptor

• Requires a Smartphone that is iOS/Android compatible;
• The Network adaptor (adaptor) is designed specifi cally as a terminal for the
Panasonic AC controller;
• Do not attach the adaptor to metal as wireless performance will be adversely
affected;
• The adaptor recommended to be installed outside of the indoor unit. (It needs to
be accessed when connecting it or when there is a problem.);
• The Wireless LAN network coverage must include the air conditioner installation
location;
• Do connect the Wireless LAN to a compatible Panasonic Air Conditioner with a
connectivity interface port.
Specifi cation
Input Voltage
DC 12V (From air conditioner indoor unit)
Power consumption
Max: 660 mW
Size
66 mm (H) x 36 mm (W) x 12 mm (D)
Weight
Approx. 85g
Interface
1x Wireless LAN
Wireless LAN standard
IEEE 802.11 b/g/n
Frequency range
2.4 GHz band
Encryption
WPA2-PSK (TKIP/AES)
Router
Internet
Parts Identifi cation
5
4
3
2
No
Item
1
Power LED
2
Link LED
3
Status LED
4
Setup Switch*
5
Check Switch*
6
Reset*
* The device factory reset can be done by press and hold CHECK and SETUP
button for 10 seconds. After release the CHECK and SETUP button, press the
reset button.
4
6
1
Description
Indicates that the adaptor is being supplied with
power.
Indicate the communication status of adaptor to
the server.
Indicate the communication status of adaptor to
the air-conditional.
Green: status without weekly timer
Orange: status with weekly timer
Red: Abnormality
Red  Orange  Green :
Auto updating
adaptor fi rmware
During signal strength checking:-
Strong: 
Medium: 
Weak: 
No signal: 
Connection setup mode switching
Signal strength checking (press and hold for 5
seconds then release)
Disable LEDs display (press and hold for 10
seconds then release)
Soft reset

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido