Screw (+Psw 4 × 10); Screw (+Psw 4 × 20) - Sony SU-WL450 Instrucciones De Instalación

Ocultar thumbs Ver también para SU-WL450:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
If standard mounting (2-a) is selected:
 Spacer (60 mm)
 Screw
 Belt
If slim mounting (2-b) is selected:
 Spacer (20 mm)
 Screw
 Belt
5
Connect the necessary cable(s)
to the TV or LCD Monitor.
Make sure to connect the cables before
installing the TV or LCD Monitor on the wall.
You will be unable to connect the cables
when the TV or LCD Monitor is installed.
Note
 Subcontract the cable routing in the wall to a
licensed contractor.
 Bundle the connecting cables to prevent stepping
on them before wall mounting.
(+PSW 6 × 50)
 Screw
(+PSW 6 × 20)
 Pulley
(+PSW 6 × 20)
 Screw
(+PSW 6 × 20)
 Pulley
− 15 (GB) −
Installing the TV or LCD
Monitor on the Wall
KD-85X8xJ / 85X8xBJ / 85X8xTJ /
75X8xJ / 75X8xBJ / 75X8xTJ,
KM-85X8xJ / 75X8xJ, XR-75X9xJ,
XRM-75X9xJ, FW-75BZ30J only
WARNING
 Be sure that two or more persons (three or more
persons for 189.3 cm (75 inches) and above TV or LCD
Monitor set) hold the TV or LCD Monitor when carrying
it.
1
Lift the TV or LCD Monitor.
• For the location of the Pulleys  to hang
on the Base (20)  or Base Adaptor ,
refer to "Base Adapter  fitting location"
on page 23.
• Make sure that the rear of the TV or LCD
Monitor touches the Base (20)  or Base
Adaptor  when holding the TV or LCD
Monitor.
Note
 Hold the TV or LCD Monitor securely with both
hands and make sure the Belt  and the bottom
of the TV or LCD Monitor align with the masking
tape.
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido