IBM OPTIONS 00N8069 Manual De Instrucciones página 13

Installing the device drivers for Windows NT
If you use Windows NT, follow these instructions to install your device
drivers:
1. Start Windows NT.
2. Click Start, click Settings, and then click Control Panel.
3. Double-click Display, and then click the Settings tab.
4. Click Display Type.
5. Click Change.
6. Select Standard display type from the Manufacturer's list and VGA
compatible display adapter from the Display list.
7. Click OK, and then click OK.
8. Close the windows, shut down the operating system and turn off
computer.
9. Remove the previous graphics adapter and insert the new one.
10. Turn on the computer.
11. Start Windows NT.
12. When Windows NT restarts, click Start, click Settings, and then click
Control Panel.
13. Double-click Display, and then click the Settings tab.
14. Click Display Type, and then click Change.
15. Insert the CD. Click Have Disk.
16. Click Browse and click to the CD-ROM drive.
17. Double-click Drivers, double-click GeForce2 MX, and double-click on the
operating system.
Note: If Windows cannot find the files for the NVIDIA Graphics Adapter,
make sure the path for the CD-ROM is correct and the correct CD
is inserted.
18. Click Open, and then click OK.
19. Select NVIDIA GeForce2 MX and click Yes to copy the files. The files
copy to your hard disk.
20. Click OK, close the windows and then click Yes to restart the computer.
The computer restarts.
Installing the device drivers for Windows Me
If you use Windows Me, follow these instructions to install your device
drivers:
1. Start Windows Me.
2. Click Start, click Settings, and then click Control Panel.
3. Double-click Display, and then click the Settings tab.
4. Click Advanced, then select the Adapter tab, and then click Change.
5. Select Specify the location of the driver (Advanced), and then click Next.
6. Select Display a list of drivers, and then click Next.
7. Select Show all hardware.
8. From the Manufacturer's list select Standard display types.
Installation guide
1-5