Device Description - KRESS 1050 FME-1 Manual Original

40974_BA_FME_1603.book Seite 18 Mittwoch, 2. März 2016 5:51 17
18 English

3. Device description

Read all the warnings and instruc-
EN
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Device components
1 Locknut
2 Collet chuck
3 Spindle
4 Locking button
5 On/off switch
6 Speed governor turning wheel
7 Mains cable module
8 Locking for mains cable module
Illustrated or described accessories
are not necessarily included in the
scope of delivery
Scope of supply
See packaging
Specified Conditions of Use
The fitted milling and grinding motor is designed for
milling wood and plastics and for grinding wood,
plastic, steel and aluminium. The motor must not
be guided by hand without appropriate milling
attachments.
Requirements for the user
The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.
Technical data
Milling and grinding motor
Input power
Output power
Idle speed
Speed for rated load
FME-EN / 1603
530FM
Watt 530
Watt 270
-1
min 29.000
-1
min 14.300
Tool fitting with collet
chuck ø
Grinding tool ø, max.
Milling-ø
Dimension
Weight
Protection class
Milling and grinding motor
800FME/800FME-Q
Input power
Output power
Idle speed
Speed for rated load
Tool fitting with collet
chuck ø
Grinding tool ø, max.
Milling-ø
Dimension
Weight
Protection class
Milling and grinding motor
1050FME/1050FME-1/1050FME-P
Input power
Output power
Idle speed:
1050FME
1050FME-1/1050 FME-P min
Speed for rated load
1050FME/1050FME-1
Tool holding fixture
with collet ø
1050FME-P
Tool holding fixture
with collet ER16 ø
Grinding tool ø, max.
Milling-ø
Dimension
Weight
Protection class
Your power tool is doubly insulated in
compliance with EN 60745; there is
thus no need for an earth wire.
The machine is radio and TV interference-free in
accordance with EN 55014-1 and interference-
proof in accordance with EN 55014-2.
Device description
mm 22
mm 40
mm 30
mm 240x73
kg 1,3
II
Watt 800
Watt 420
-1
min 10.000-29.000
-1
min 25.000
mm 8
mm 40
mm 36
mm 262x73
kg 1,4
II
Watt 1050
Watt 600
-1
min 10.000-29.000
-1
5.000-25.000
-1
min 24.800
mm 8
mm 8
mm 40
mm 36
mm 289x73
kg 1,7
II