Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Each time you press
ods of the schedule in the following order (from left to right):
Weekdays (MO TU WE TH FR)
1
2
3
Set the start time for the displayed
period using
and
skip a period, do not set the start time
for that period.
NOTE:
To reset a period, press the mode
selection button.
Set the temperature for the period
using the temperature adjustment
buttons.
Repeat steps 2 to 4 for remaining
periods.
Press
to return the thermostat to normal operation.
Manual (hold) mode
To use this mode, press the mode selection button until
MAN is selected on the screen and set the desired
temperature using the temperature adjustment buttons.
In Manual mode, the programmed schedule is not
used. The temperature must be set manually.
Economy mode
To use the Economy mode, press the mode selection
button until ECONO is selected on the screen. The
Economy mode is ideal for weekend residences and is
to be used only when you are not there. In this mode,
the thermostat provides two temperature settings
which can be used as follows:
•
Setting 1 can be used to raise the temperature to a
comfortable level by your expected arrival time.
•
Setting 2 can be used to lower the temperature if you do not
show up by the usual time.
A typical schedule is shown below.
Settings
1
Raise the temperature
2
Lower the temperature
The Economy mode can be used as follows:
Place the thermostat in Economy mode when you are away from
your cottage.
Upon your arrival, switch the thermostat to Automatic mode or
Manual mode before setting 2 of the Economy mode starts.
When departing, switch it back to Economy mode. The thermo-
stat will then lower temperature (setting 2) during most of your
absence and will raise temperature prior to your expected arrival
(setting 1).
To enter the two temperature settings:
Press the mode selection button until ECONO is
selected.
Press
. The first period is displayed.
RLV430
, the thermostat scrolls through the peri-
Weekend (SA SU)
4
1
2
3
. To
Day
Time
Friday
3:00 p.m.
70°F (21°C)
Friday
8:00 p.m.
59°F (15°C)
Set the start day for the displayed period
using
Set the start time using
4
Set the temperature for the period
using the temperature adjustment
buttons.
Press
gram (2).
Repeat steps 2 to 4 to set the day,
time and temperature.
Press
Thermostat Reset
Warning:
and reprogram the schedule. You might need to set the thermostat's
configuration.
Press and hold
Reset the thermostat using a pointed object (e.g., paperclip).
Wait one second and release
Power Outage
During a power outage, the thermostat display remains lit for approx-
imately the next 15 minutes during which the low power (LP) indicator
appears. The settings are stored in memory. However, if the power
failure exceeds 5 hours, only the thermostat's clock must be
re-adjusted. When power returns, the thermostat returns to the mode
of operation preceding the power outage.
Setpoint
.
and
.
to select the next pro-
to return the thermostat to normal operation.
After the thermostat is reset, you must re-adjust its clock
.
69-1874ES
7.
.
8.
9/7/05
3/8
Publicidad
Tabla de contenido
