Fein WSB 20-180 Manual Del Usuario página 16

3 41 01 020 06 3.book Seite 16 Dienstag, 10. Mai 2005 11:34 11
EN
Special safety instructions.
Operations such as sanding or polishing are not
recommended to be performed with this power
tool.
Do not rivet or screw any name-plates or signs
onto the power tool.
Wear personal protective equipment. Depending
on the application, use face shield, safety goggles
or safety glasses. As appropriate, wear dust mask,
ear protection, gloves and shop apron capable of
protecting you against flying debris from the
accessory or work piece.
Handle accessories carefully and store them
according to the manufacturer's instructions.
The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool.
Wheels must be used only for recommended appli-
cations. For example: do not grind with cutting
wheels.
Do not use accessories which are not specifically
designed and recommended by the power tool
manufacturer.
Do not use accessories that require liquid cool-
ants.
The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool.
The arbor size of wheels, flanges, backing pads or
any other accessory must properly fit the spindle
of the power tool.
Do not use worn down wheels from larger power
tools.
Do not use a damaged accessory. Before each use
inspect the accessories such as abrasive wheels
for chips and cracks, backing pads for cracks,
tears or excess wear and wire brush for loose or
broken wires. If the power tool or the accessory is
dropped, inspect for damage or install an undam-
aged accessory. After inspecting and installing an
accessory, position yourself and bystanders away
from the plane of the rotating accessory and run
the power tool at maximum no-load speed for one
minute.
Make absolutely sure that the accessory is
mounted in accordance with the manufacturer's
instructions. The mounted accessory must be able
to rotate freely.
Always work using the auxiliary handle.
Always use an undamaged wheel flange of the
correct size and shape for your selected wheel.