Fein WSB 20-180 Manual Del Usuario página 17

3 41 01 020 06 3.book Seite 17 Dienstag, 10. Mai 2005 11:34 11
Use only wheel types that are recommended for
your power tool and the specific guard designed
for the selected wheel.
Always use the guard designed for the type of
wheel you are using. The guard must be securely
attached to the angle grinder and positioned for
maximum safety. It must be mounted in the safest
possible position, such that the least amount of
wheel is exposed towards the operator.
Clean the ventilation openings on the power tool at
regular intervals. The motor blower draws dust
into the housing.
Do not operate the power tool near flammable
materials.
Keep bystanders away from the working area.
Anyone entering the working area must wear per-
sonal protective clothing/equipment.
Conduct the mains lead away from the rotating
wheel.
Hold the power tool by the insulated gripping sur-
faces only, when performing an operation where
the accessory could contact hidden wiring or its
own cord.
Beware of any concealed electric cables, gas or
water conduits;
Never lay the power tool down until the accessory
has come to a complete stop.
Do not carry the power tool at your side while the
motor is running.
Causes of kick-back and precautionary
measures for the operator.
Hold the power tool firmly and position your body
and arms optimally to withstand any kickback
forces. Always use the original auxiliary handle so
that kickback forces or the starting torque can be
mastered in the best possible way.
Never place your hand near the rotating acces-
sory.
EN