Technical Data - YATO YT-6700 Manual De Instrucciones

CHARACTERISTICS OF THE TOOL
The gas torch is fed with compressed butane. Thanks to temperature regulation, it may be widely applied to tasks
requiring high temperatures. It facilitates soldering, bonding and welding. Thanks the internal butane tank, the tool
is fully portable and has a wider scope of application than traditional gas torches.
EQUIPPMENT
The soldering tool is delivered complete and does not require assembly.
The soldering tool is delivered with the tank empty. It is not equipped with gas to fill the tank either.

TECHNICAL DATA

Parameter
Catalogue number
Temperature of the flame
Gas tank capacity
Kind of applied gas
Maximum working time *
Length
Weight (with the tank empty)
(*) With one filling of the tank and minimum adjustment of the gas regulator.
SAFETY INSTRUCTIONS
The tool contains compressed gas; be careful.
Do not work in closed rooms; all work must be performed in well ventilated rooms.
The tool must not be exposed to temperatures exceeding 50
Do not punch the tool; do not expose the tool to open fire.
Incorrect adjustment of the regulators may cause an excessive or uneven flame.
Close to fire or other sources of heat: do not fill the tool with gas; do not start the tool. During ignition, protect your
face and other parts of the body.
The work station must be well illuminated and clean. Disorder and dim light may be a cause of an accident. Perform
the work away from inflammable and oiled materials.
Do not allow children and unauthorised persons close to the work station. Distraction may cause inability to control
the tool.
Be particularly careful during work with the flame, since its temperature may reach 1300
hardly visible or invisible in strong light.
Use means of personal protection. Always wear protective goggles. Use means of personal protections, such as
dust-masks, protective shoes, helmets and hearing protectors in order to reduce the risk of serious injuries.
Do not wear oiled clothes during work.
Keep balance. Maintain an appropriate posture during the whole work. It will guarantee a better control of the
electric tool in case of unpredictable situations during work.
O P E R A T I N G

GB
Unit of measurement
[ C]
O
[ml]
[min]
[mm]
[kg]
C; avoid prolonged exposure to sunlight.
O
I N S T R U C T I O N
Value
YT-6700
1350
60
butane
200
177
0,460
C. The flame may be
O