Troubleshooting; Passos Para Encadernar - Fellowes Pulsar e 300 Manual De Instrucciones

PORTUGUÊS PORTUG
ANTES DE ENCADERNAR
1 2
1. Certifi que-se de que o indicador 2. Seleccione o diâmetro correcto
luminoso verde de energia está aceso. do pente, utilizando o tabuleiro de
armazenamento do pente.
4 5
4. Puxe a alavanca de abertura do 5. Perfure folhas de rascunho para
pente para abrir o pente. testar as regulações do guia de bordo.

PASSOS PARA ENCADERNAR

1 2
Capa
Máx. 15 Máx. 15
30
( ( 80 gsm)
Contracapa
1. Primeiro, perfure a capa e 2. Perfure as folhas em pequenos
a contracapa. lotes, de forma a não sobrecarregar
a máquina ou o utilizador.
72
3
3. Insira o pente de plástico dentro do
mecanismo de abertura.
3 4
3. Coloque as folhas perfuradas 4. Quando todas as folhas perfuradas
directamente sobre o pente aberto. forem colocadas sobre o pente,
Comece com a parte da frente empurre a alavanca do pente para
do documento. trás para fechar o pente e retire o
documento encadernado.
CORRECTING A BOUND DOCUMENT
Additional sheets may be include or removed at any time by opening and then closing the comb as previously described.
REMOVAL OF WASTE CLIPPINGS
The waste tray is located under the machine and is accessed from the right side. For best results empty the tray regularly.
STORAGE
Switch off the machine. Lower the lid. The Pulsar-E comb binder is designed to be stored horizontally on the desk.

TROUBLESHOOTING

Problem Cause
No Green power neon Machine is not switched on
Red standby neon Machine is overloaded when punching
Punched holes are not central
Edge guide not set
Machine will not punch Blockage
Punch holes are not parallel to edge. Debris is stuck below dies.
Waste tray leaks Waste tray is not correctly inserted or 'burst feature' has activated
Partial holes
Sheets not correctly aligned to punch pattern.
Damaged hole edges Possibly overloading the machine
Waste tray leaks Waste tray is not correctly inserted or 'burst feature' has activated
WARRANTY
Fellowes warrants all parts of the binder to be free of defects in material and workmanship for
2 years from the date of purchase by the original consumer. If any part is found to be defective
during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes'
option and expense, of the defective part. This warranty does not apply in cases of abuse, mishan-
dling or unauthorised repair. Any implied warranty, including that of merchantability or fi tness for
particular purpose, is hereby limited in duration to the appropriate warranty period set forth above.
Solution
Switch on machine at rear next to plug inlet and at the socket.
Press the punch button. The machine will withdraw the punches and re-set
itself. Continue this process until the punch cycle is complete
Adjust edge guide until hole pattern is correct
Check waste tray is empty. Check for blockage to paper entry.
Take stiff cardboard and slide into the paper entry. Move the cardboard
sideways to release any stray clippings into the waste tray.
Check waste tray is empty and 'burst feature' is closed.
Adjust edge guide and test punch scrap sheets until correct
Punch plastic covers with paper sheets. Reduce number of sheets being
punched.
Check waste tray is empty and 'burst feature' is closed.
Need Help?
Customer Service....
www.fellowes.com
Let our experts help you
with a solution.
Always call Fellowes
before contacting
your place of purchase.
In no event shall Fellowes be liable for any consequential damages attributable to this product.
This warranty gives you specifi c legal rights. You may have other legal rights that vary from this
warranty. The duration, terms and conditions of this warranty are valid worldwide, except where
different limitations, restrictions or conditions may be required by local law. For more details or to
obtain services under this warranty, please contact Fellowes or your dealer.
5