Dune HD Duo 4K Manual De Instrucciones página 15

ENGLISH
MENU» RC button and then choose «Add as Network Folder» action.
For more information, see http://dune-hd.com/support/my_collection
Using Z-Wave
The player has built-in Z-Wave radio module for the integration into Smart Home
systems based on Z-Wave technology. To use Z-Wave functionality, «Z-Wave
Controller» application should be installed. The application is available in Dune
Store catalog in «Applications» section.
For more information, see http://dune-hd.com/support/z-wave
Using Audio Input
The player has coaxial S/PDIF audio input.
This allows the use of the ESS SABRE32 Reference DAC built-in into the
player to play digital audio streams from external audio source.
To use coaxial S/PDIF audio input, connect it to the the coaxial S/PDIF audio
output of an external audio source.
Learning Remote Control
The TV section on the remote control has 5 learnable buttons (UP, DOWN,
AV IN, TV INFO, TV POWER), which can be programmed to control your TV
or other equipment. Buttons are learned by IR signals from another IR remote
control.
To program these buttons, perform the following steps:
1. Press and hold "SET" button on your RC until the LED near the "POWER"
button on your RC lights up. This indicates that your RC has entered into the
learning mode.
2. Put the IR emitter of the other RC in 3-5 cm opposite to the IR receiver of
your RC.
3. Press and hold a button on the other RC until the LED on your RC starts
15