DUNE HD DUO 4K
blinking. This means that your RC has learned the IR signal of this button.
4. Press a button on your RC (one of 5 learnable buttons in the TV section).
This button will be programmed to generate the just learned IR signal. The
LED on your RC will light up again. This means that your RC is again in the
learning mode.
5. Learn other buttons of your RC the same way if needed (repeat steps 3 and
4).
6. Press the "SET" button on your RC again to exit the learning mode.
Limitations
Compatibility of the player with a particular hardware (A/V equipment, network
equipment, disk drives, etc) may depend on various factors (particular hardware
model, specifics of hardware installation and usage, configuration of the player
and the hardware, etc). If the player does not work correctly with a particular
hardware, try to adjust the configuration of the player or hardware, try to use
the hardware in a different way, or try to use some other hardware.
Compatibility of the player with a particular media content (files, discs, etc)
may depend on various factors (specifics of media content encoding, specifics
of the configuration of the player, etc). If the player does not play correctly a
particular media content, try to adjust the configuration of the player, or try to
use media content encoded in a different way.
Updating Your Player and Getting More Information
Please check here for updated versions of player firmware (which may
improve player functioning and extend player possibilities): http://dune-hd.
com/firmware/
You can also connect the player to Internet and use the online firmware
upgrade function, see "Setup / Misc / Firmware Upgrade" menu.
Please check here for more detailed and up-to-date documentation and
information on player usage:
http://dune-hd.com/manuals/
http://dune-hd.com/support/
http://dunehd-europe.com/support/
16