ELICA CRUISE ISLAND Montaje Y Modo De Empleo página 20

Replacing lamps
Fig. 27
Disconnect the appliance from the electricity.
Warning! Prior to touching the light bulbs ensure they are
cooled down.
Replace the old light bulb with the one of the same type as
specified in the feature label or near the light lamp on the
hood.
1. Using a flat head screwdriver or equivalent tool, carefully
pry loose the light cover.
2. Remove the damaged light and replace it with a new one
(see the table below):
Lamp Power (W)
Voltage (V)
12
ILCOS D Code
(according IEC 61231)
HSGST/C/UB-10-12-G4-10/22
3. Reinstall the light cover. (it will snap shut).
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.
Socket
10 G4
Dimension (mm)
10 (Diameter)
22 (Light Center
Length)
20