Kohler K-870 Diagrama De Instalación página 2

No change in measurements if connected with drain
illustrated. (K-7166-AF or K-7166M-AF)
42" (106.7 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Product Information
With neck jets
Without neck jets
With neck jets
Without neck jets
Fixture*: Basin area
Bathing 47" (119.4 cm) x
well 24-1/2" (62.2 cm)
Water depth
To 16-1/2" (41.9 cm)
overflow
* Approximate measurements for comparison only.
Product Pump
Neckjets 2 hp
w/o 1.5 hp
Neckjets
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/2" (179.1 cm) x 40-1/2" (102.9 cm)
Cut-out for undermount
1019486-1-C
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
1-1/2" OD
K-870-N1 shown
K-870-H2 not shown
K-872-N1 not shown
K-872-H2 not shown
Top area
65-1/4" (155.7 cm)
x 35-1/4"
(89.5 cm)
Capacity
110 gal (416.4 L)
Heater V A*
1.5 kW 240 15
1.5 kW 240 11
K-580 template
36" (91.4 cm)
2" (5.1 cm)
4" (10.2 cm)
36" (91.4 cm)
72" (182.9 cm)
2-1/2" (6.4 cm)
7/8" (2.2 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
Weight
Installation Notes
495 lbs
(224.5
Install this product according to the installation guide.
kg)
Cast iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of
2200 lbs (997.9 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
2
K-870-N1
2-3/4"
(7 cm)
23-1/2"
(59.7 cm) 2-1/16"
(5.2 cm)
208-240 V, 20 A, 50/60 Hz
11-1/2"
(29.2 cm)
2-5/16"
(5.9 cm)
5" (12.7 cm)
3/4" (1.9 cm)
22"
(55.9 cm)
Kohler Co.