Diagram 10; Setup Web Page - Network; Wired Network Connection - NAIM mu-so Qb Manual De Referencia

2.2 Wired Network Connection.

To connect Mu-so to a local network using a wired
connection follow the steps below:
• Disconnect Mu-so from mains power.
• Connect Mu-so to your local network router using a
standard Ethernet cable.
• Re-connect Mu-so to the mains power supply and wake
it from standby by touching its display Standby icon or
pressing the handset Standby button (not Mu-so Qb).
After a few moments Mu-so should be available for
streaming on your home network. The Mu-so status
indicator will illuminate white.
Note: Mu-so can be configured to use a static IP address
if required via the Advanced Settings tab on its setup
page. Diagram 10 illustrates the setup page.

Diagram 10

Setup web page - Network

2. Network Connection
8