Tabla de contenido
Publicidad
Diagram 4
Place Mu-so Qb on a shelf or table
Diagram 5
Mu-so Qb connection panel
Mains power socket
USB audio input socket
Network socket
1.2 Switch On and Standby
Mu-so and Mu-so Qb will immediately switch-on in standby
mode when connected to a mains supply.
There are two standby modes: standby and deep sleep.
In standby mode, network and Bluetooth connections
remain operational to enable Mu-so and Mu-so Qb to
"wake" automatically when in receipt of a Naim App control
command or a music stream. In deep sleep mode, network
and Bluetooth functions will shut-down in order to reduce
power consumption to a minimum.
•
To switch Mu-so or Mu-so Qb into standby mode
tap the touch panel Standby icon or press the Mu-so
handset Standby button. Touch the Standby icon or
handset button again to leave standby mode.
1. Getting Started
•
To switch Mu-so or Mu-so Qb into deep sleep mode
touch and hold the touch panel Standby icon, or press
and hold the Mu-so handset Standby button. The
display segment above the Standby icon will flash
as deep sleep mode is engaged. Touch and hold the
Standby icon or handset button again to wake from
deep sleep.
Note: If unused for 20 minutes after waking from standby
or deep sleep, Mu-so and Mu-so Qb will return to standby
mode. The auto standby time can be adjusted via the
Naim App Settings menus.
4
Analogue audio input socket
Digital audio
input socket
Status indicator
Pin-hole button
Publicidad
Tabla de contenido
