Lcd Display; State Of Charge - Cleco 936400PT Manual De Instrucciones

5

LCD display

The LCD display indicates charging cycles and current state of charging.
5.1 Charging cycles
Once the battery has been pulled out of the charger, the charging cycles performed will be displayed for
5 seconds. The segments are flashing at 1 Hz as follows
Display is flashing
NOTE
The battery should be replaced after >800 charging cycles

5.2

State of charge

Once the battery has been pulled out of the charger, the charging cycles performed will be displayed for
5 seconds (see 5.1 Charging cycles). After that the state of charge of the battery is displayed permanently.
If the battery is not used for more than 5 days it will go to Deep Sleep Mode to save energy and extend the
self-loading time. The LCD display is switched off in this condition.
Slide battery onto the charger and return to normal state.

Display
flashing
70b_1_5 en.fm, 12.03.2015
All manuals and user guides at all-guides.com
EN
Charging cycles
0 - 199
200 - 399
400 - 599
600 - 799
> 800
State of charge
Deep Sleep Mode or faulty
<20 %
20 – 40 %
40 – 60 %
60 – 80 %
80 – 100 %
P2070BA/EN 2011-06
5
LCD display
25